Modern Water Fuel Circuits 

THE STUDENTS OF HYDROGEN HOT RODS

I decided to put this basic entry version circuit at top of this page as most of you all need to fully understand this one first ,

i know most of you will say "God so basic "but yes it is ,

 

Keep this version in mind at all times before moving on to the 2020 Circuits.

Remember no salts no electrolyete only distilled water ,

BESURE to put a Gap in your transformer /Choke

as it makes more capacitience to cell.

We can all laugh but remember as of May 2020 many of the so called Best in world  hydrogen companies are still stupidly using electrolysis and have

no idea of VOLTROLYSIS

Simply put  take their business away from them immediatley. 

Febuary 26, 2013

Here is Daniel's power stage that he used in trials and tests with values ​​and everything. 

Sorry for the delay in uploading the scheme but it is not easy to design and upload something that really works well, this one I am uploading works quite well with power supplies from 15 to 350VDC  The coupling with the pulse generator is by a driver for the TLP 250 mosfet, it is like an optocoupler but improved. It works well up to 25Khz. I use an IRFPC60 N-channel mosfet that supports up to 600v but if they are going to feed it with less than 200vcc an IRFP250 or 260 is fine.

Features:

STANS REFERENCE  CIRCUIT 9XB
Power: 15 vdc to 350 vdc.
Maximum current: 4A
Maximum frequency: 25khz
Input: TTL signal (5vcc) 20ma max.

NOTE  BE SURE TO SMALL GAP the E52 2000 Perm Core

hho cell lpm

Cold Process

No electrolyte

Voltrolysis Stanley A Meyer

Many people are shocked when they realize they Stanley A Meyer Systems and methods work as stated, they are also often shocked to learn  water is fuel.  What often shocks them most is Stan's systems and circuits are extremely wide spread in use and being taught built and put in place around the world. This Initial Circuit below is " School Girl Circuit" if a School girl can build this and have water fuel so can you .  ENJOY  ( no electrolytes  use distilled water.)

HYDROGEN HOT RODS

GO Faster Go Further 

Stanley A Meyer Valid Working Proven Legit Real Truth

Stan Meyer's 8XA - 90 degree control:

 

•28 May 2013  ( attention is in the detail of what does 90' degrees mean.?" LMD)

 

Electrical Polarisation Process - Water electrolysis

 •8 Mar 2014

 

8XA Bifilar inductor

 •9 Mar 2014

 

Stan Meyer's 8XA - Amazing Step Charge !!!!!

 

•29 May 2013  Let me take this moment to remind you to join as a Builder member or Make a Donation to help us keep this information here and growing. 

Remember to give more than you take from this website please. Thanks Dan

 

Stan Meyer's 8XA circuit has one serious drawback - if network frequency (110 Volts / 60 Hz) is change, "Step Charge" settings too changing.

 

As you know, the network frequency is vary! Stan Meyer's 8XA circuit without 4-Diode Bridge Rectifier. The circuit work like Stan Meyer's VIC - "Half-wave rectification":

http://en.wikipedia.org/wiki/Rectifier

 

"Gated" Generator is tuned to 51 Hz ! (Supply frequency 50 Hz / 220 Volts) My modifying 8XA circuit with Half-wave rectification and 180 degree control:

 (Zener Diode is added)

High Voltage, Low Current - Water Conductivity

 

•30 Jul 2016

 

Stan Meyer's 8XA

 •5 May 2013

 

Water cell with Isolated surface... Is this possible?

 

•12 Feb 2015  Toroidal transformer - FERROCORE T41X15X27 As you see, about 600 Volts is absolute minimum for Water dissociation, if Water Cells is covered with insulation layers! Now i search more effective insulation method.

 

Stan Meyer's Electron Extraction Circuit- Training Version

•13 May 2013

 

8XA circuit with High Power SCR

 

•3 Jun 2013  Stan Meyer's 8XA circuit has one serious drawback - if network frequency (110 Volts / 60 Hz) is change, "Step Charge" settings too changing. As you know, the network frequency is vary! This can cause heat and changing results

 

Generator is created with LM 566 - VCO (Voltage Controlled Oscillator) For prevent overheating resistors, Ultra High Power SCR is controlled by other Low Power SCR - Darling ton circuit

 

HHO Ultra Power Driver

 

•16 Jun 2013  This is my new circuit! "Step Charge" time is constant. Output Driver power is over 30000 Watts - over, over, over... than need!  

"Frequency Adjust" - tune "Step Charge" time. "Maximum Voltage Adjust" - tune maximal voltage limit. "Positive Ramp Offset Adjust" - coordinate triangle waveform to optocoupler.

 

"Minimum Voltage Adjust" - tune the minimum voltage at which water molecule is Breakdown - "Water Breakdown Point" "Step Charge" vary between Voltage "Water Breakdown Point" and "Maximal Voltage"!

 

Ultra short pulse water electrolysis

16 Oct 2013

 

Stanley Meyer's Water Fuel Cell Resonant Condition with use TAP WATER Professor M. Kanarev - "GENERATORS OF GLOBAL (CLEAN) ENERGY" http://guns.connect.fi/innoplaza/ener...   BACKUP DOCUMENT HERE

"A novel method of hydrogen generation by water electrolysis using an ultra-short-pulse power supply" http://www.tuks.nl/pdf/Reference_Mate...          BACKUP DOCUMENT HERE     also see Lex Banki Nano pulser

Water electrolysis

•22 Feb 2014

 

How to Measure the Capacitance of Water Cell

•10 Sep 2017

 

How to measure Self Resonant Frequency of the

Stanley A Meyer Water Fuel Cell

 

•23 Oct 2016

 

How to De  Ice Water Cell 

•17 Mar 2015

Remember we want to stay under 25 C so we keep nano bubbles in the water 

 

RESONANCE

 

•17 Mar 2015

 

Andrija Puharich`s Circuit diagram

 •6 May 2017

Stanley and Stephen Meyer based some of their circuit thoughts on Andrija Puharich`s

and Nikola Tesla's circuit Works.

You can continue study on these on the START HERE Test Cell Pages which Proves 

Stanley Meyers Systems work and that he told the truth to save mankind.

 

Stanley Meyer`s RESONANCE Water Electrolysis - DEMONSTRATION

H Bridge  25 Apr 2020

 

Stanley Meyer`s RESONANCE Impedence Matching Circuit A Voltage Doubler with Inductors.   21 Mar 2020

 

Exmaple
1 Set per Phase Leg  total 3 phase Volternator
6 Cells

Mistakes Corrected in Stephen Meyer`s RESONANCE Impedence Matching Circuit A Voltage Doubler with Inductors   21 Mar 2020

 

Vital Knowledge

The Following videos are vital to learn and understand as Stephen Meyer made all Stan's Circuits he was a Well Trained Radar operator.

God Speed God Bless

hho cell lpm
hho cell lpm
hho cell lpm

8XA - Car Alternator's RPM - 10000 min-1

 

•16 Jul 2016

Resonance "Step-Charge" with Car Ignition Coil and WFC with "Insulated Surfaces"

 

•16 Feb 2015

 

Stanley Meyer`s RESONANCE Water Electrolysis - DEMONSTRATION

H Bridge  25 Apr 2020

 

This circuit has two pots, one for adjusting the primary coil voltage amplitude and another for adjusting the pulse voltage amplitude of the pulsing during the 'Gate' time.

There are four options for driving the primary coil.

1. Gate time high-Current flows through primary coil during gate time

2. Gate time low-No current flowing through primary coil during gate time

3. Variable pulse voltage amplitude during gate time (via P2)

4. Continuous pulse frequency

 

Both high (resonant) and low (gate) frequencies are provided by a FeelTech function generator which provides independent frequency, duty cycle, and sweep functions. The drive circuit, function generator and VIC coil are all powered by a Ryobi 18V battery and a programmable power supply as seen in previous videos. Here you can get the Multisim and image file/schematic

Note this file got damaged i have tried to clean it up from screen shots  if any finds original please email me  and I swap it out to be clearer for builders.  danieldonatelli1@gmail.com 

Stan Meyer's Electrolysis method  ( Circuit below is only part of box) 

The is the foundation of the Vic Matrix. 

•14 Mar 2014

VIC Drive Circuit April 2020

 •29 Apr 2020

 

This circuit has two pots, one for adjusting the primary coil voltage amplitude and another for adjusting the pulse voltage amplitude of the pulsing during the 'Gate' time.

There are four options for driving the primary coil.

1. Gate time high-Current flows through primary coil during gate time

2. Gate time low-No current flowing through primary coil during gate time

3. Variable pulse voltage amplitude during gate time (via P2)

4. Continuous pulse frequency

 

Both high (resonant) and low (gate) frequencies are provided by a FeelTech function generator which provides independent frequency, duty cycle, and sweep functions. The drive circuit, function generator and VIC coil are all powered by a Ryobi 18V battery and a programmable power supply as seen in previous videos. Here you can get the Multisim and image file/schematic

BradK-Hybrid VIC Driver-April 2020.ms14 - 211.53 kB, downloaded 6 times.

Bifilar Inductors

 • 2016

 

Meyer's VIC-Resonance

•7 Feb 2016

Stanley Meyer's BIG BOBBIN

 

•12 Feb 2016

What is very interesting in this practical solution?

 1. Because here is no opposite-connected inductors, 
it is not necessary to "adjust accurately" the Resonant frequency. 


BIG BOBBIN not have "Resonant Scanning Circuit", not have "Pulse Pickup coil"
 like at VIC-Transformer. BIG BOBBIN work like standard


 "ATX Power supply Pulse Transformer" 
and only produce "Step-Charge effect".

 2. It seems that gas production is better, when the Voltage on the 
cell is in "both directions" - starting with a "Negative voltage" 
and ends with a "Positive "voltage", like "Hysteresis Loop Figure"!!! 


This is the effect Andrija Puharich named:

 "Rotation moment of the proton magnetic moment":


 "This sets up a rotation moment of the proton magnetic moment which one can clearly 
see on the XY plot of an oscilloscope, as an hysteresis loop figure.

 

However, 
it is noted that this hysteresis loop does not appear in the liquid water sample
 until all the parameters of the three components have been adjusted to the
 configuration which is the novel basis of this device. 

The hysteresis loop gives us a vivid portrayal of the nuclear magnetic 
relaxation cycle of the proton in water." 

Meyer`s "Dual-Layered Multi-Spool"

 •1 Oct 2017

Step-Charge effect without Bifilar Inductors

 

•2 Feb 2015

Step-Charge" effect with Bifilar Inductors

•4 Feb 2015

This effect can be created with only one Inductor (e.g. only positive Inductor), but the Waveform is not symmetrical ! The Inductor with the Water capacitor create frequency dependent circuit. Stephen Meyer's Original device work on different way! High-Frequency sinusoidal signal (about 13,5 kHz) is created from rotating car alternator. "Gate" Frequency (about 600 Hz) is formed from Relay controlled switches:

In Patent US4936961A Stanley Meyer present what is a "Resonant charging choke": The overall circuit is characterized as a "resonant charging choke" circuit which is an inductor in series with a capacitor that produces a resonant circuit. [SAMS Modern Dictionary of Electronics, Rudolff Garff, © 1984, Howard W. Sams & Co. (Indianapolis, Ind.), page 859.] Such a resonant charging choke is on each side of the capacitor.

Stephen Meyer`s Signal Replication

 •23 Nov 2014

Stephen Meyer`s Waveform replication

 

•2 Sep 2018

Water Resonance Waveform

 •7 Oct 2018

How The VIC works - Part 1

•27 Nov 2014

Transformer Searcing the Resonant frequency of Water cell

VERSION Vic common core torroid  prmary secondary and chokes Transformer and GMS 

•9 May 2019 ( this Video was showing the inverted signal from pwm to the switch and pll)

Reference Video put in the Vic Matix Rresonance Tab)

Water Resonance waveform with Bifilar Inductor                        SYNCHRONIZATION CIRCUIT

Stanley Meyer's VIC Replication

 •6 Sep 2014

Water Resonance waveform with VIC - Transformer

 •19 Nov 2018

 

The Bifilar inductor - the most important part of Meyer`s invention

•20 Aug 2018

 Home Made Oscilloscope High-Voltage probe 1000:1

 

•4 Jun 2016                 We have a Page for the Custom Probes HERE

Note 1

We can avoid using many expsensive high voltage measuring tools

and some of the high voltage dangers by measuring the magnetic flux

some magnetic flux meters have volts on them for that reason  ,

this allows us the experiementers to have better a safety level and better measuring options with out being directly exposed to High voltage during testng

Differential Oscilloscope probe

 

•22 Sep 2017                                We have a Page for the Custom Probes HERE

Opto-Isolator for Oscilloscope probe

 

•21 May 2017  Ref Andrija Puharich`s Patent US4394230A

 

Frequency doubling - How to the Resonant inductors work

 

•24 Aug 2017

 

How to VIC Transformer "tune"

•17 Jan 2021VIC

"tune" Formula: Rsec. = (Rc1 + Rc2) / 2

 

NEW 2021

Stanley Meyer`s Hydrogen Gas Gun

•23 Mar 2013  Note this circuit is using 12 vdc and out cold voltage and using magnets for the polarization it is not ac out

we can also use vic dc with h bridge or electron extraction

 

Digital control means Tds voltage level control

Using a lm 2917, Here is a circuit   made years ago.

The output from the f/v generator pulls down the c/v pin on the 555 adjusting the duty cycle of the 555 gate timer based on engine rpm. (crankshaft sensor) 555 used to simulate.


Builder was counting the pulses, but you do not have to.

An edge trigger off the frequency output can trigger the gating monostable also, eliminating the 4017. 
 

On Demand

Gas Management System

Stanley A Meyer Gas Management System 

Replicated with Matrix and Db 37 allowing 

  1. Auto Water Fill

  2. Auto Tune

  3. Direct connect to Hydruino (Ardunio ECU)

  4. Auto Engine Start once fuel rail pressure reached

  5. Automatic cell pressure scaling

  6. Parallel Vic Control and sequence firing control

  7. Safety Controls

  8. Power Module Ready with rails to drive ecu and expansion cards

  9. 9 Water injector Pwm driver signal into Big round bobbin

  10. Auto duty , pwm and amplitude adjust to throttle position.

  11. Packed in Box for Distribution 

 21/08 2020

 

Ace-high Straight flush 

Relay Power Control Modules with staged on off sectioned on off Vic , with wireless remotes and blue tooth.

Mil Spec Compliant

 

Replacement for the K7 Laser Accelerator

Meyers TPS Board Connect TPS sender Sensor from all cars Bikes to Meyer GMS VIC Matrix. to make Gas On demand 

•4 th June  2020

 

GMS Matrix Main board now with db 37

KAGF1

Parallel  10 Vic 

Main part of the step charging circuit that people have
\ missed. Everybody thinks that step charging is an effect that
 happens, but it's not. Voltage doubling is real in each vic but the 
 Step charging was a forced oscillation. meaning yes we get voltage doubling we get LMD oscillation and cell charging , but in additional we can magnify oscillations with trigger time parallel vics if it sounds like a  very powerful fuel on demand maker it is..
THANK YOU HYDROGEN HOT RODDERS